R. Woudsma:   The Loonsong Instrument Company Home Home

Once the sides are contained in the form and properly aligned, the tail block is glued in, joining the two sides.

A cut-away block is required to connect the treble side of the guitar to the cut-away section of guitar side. To properly align the block, clamping must be done from the front as well as the back of the guitar.

Once the neck block, tail block and cut-away block are all glued in place , the final shape of the guitar is  set. The connected sides can be released from the mould.

The sides are now ready to be assembled with the guitar back and then the guitar front to form the guitar body

phase 7 phase6